Page 1 of 6 | Next >

Manufacturers
Greenlee Textron

Product Categories
Abrasives & Cutting Tools
Chemical Lubricants Sealants & Paint
Electrical & Lighting
Hand Tool
Machinery & Equipment
Material Handling
MRO & Contractor Supplies
Power & Hydraulic Tools
Precision Tools
Safety & Security
Welding






DRIVER-PUNCH HYD 1/2X1 (1731)

Portable C-Frame Punch Drivers....(more info)


DRIVER-PUNCH HYD 1/2X1 (1731)

SKU: GRL1731


C FRAME-HYD KO DRIVER (1732)

Fast, one-shot punching, no predrilling of pilot holes. Use with 1/2 through 4 conduit size and other round sizes only. Use with Greenlee standard round punches and dies (optional). Throat measures 8 (203 mm) deep.....(more info)


C FRAME-HYD KO DRIVER (1732)

SKU: GRL1732


PUNCH UNIT-CONNECTOR 9 PIN (229)

Cut-out and mounting slots are punched in one operation. Drill only one 7/16 (11.1 mm) pilot hole. Fast, accurate panel punching with no sawing or filing required. Universal size punches for front or back mount of TRW Cinch and ITT Cannon-type or equivalent connectors in 9, 15, 25, 37 or 50-pin configurations. ....(more info)


PUNCH UNIT-CONNECTOR 9 PIN (229)

SKU: GRL229


PUNCH UNIT-SQ .500 (12.7)

For Use With Punch:60002 Die:60003 Draw Stud: 60115 BB Drive Nut: 60120 Counter Nut: 05244....(more info)


PUNCH UNIT-SQ .500 (12.7)

SKU: GRL60001


PUNCH UNIT-RECT.437X.875(11.1X22

For Use With Punch:60026 Die:60027 Draw Stud: 60115 BB Drive Nut: 60120 Counter Nut: 05244....(more info)


PUNCH UNIT-RECT.437X.875(11.1X22

SKU: GRL60025


PUNCH UNIT-D .500 DIA X .469 FLA

Punch Unit (Includes Punch Die and Draw Stud) Hole Size: .500,.469 Inch 12.7,.11.9 mm, Maximum Capacity Mild Steel: 16 GA. 2.0 mm, operation type: Hand/Hydr, Minimum Pilot Hole: .375 Inch, 9.5 mm, Punch: 60078, Die: 60079, Draw S ....(more info)


PUNCH UNIT-D .500 DIA X .469 FLA

SKU: GRL60077


PUNCH UNIT-KEY .481 DIA X .055 K

Punch Unit (Includes Punch Die and Draw Stud) Hole Size: .481,.055,.030 Inch 12.2, 1.4,.8 mm, Maximum Capacity Mild Steel: 16 GA. 1.5 mm, operation type: Hand/Hydr, Minimum Pilot Hole: .375 Inch, 9.5 mm, g - Punch: 60102, Die: 60103 ....(more info)


PUNCH UNIT-KEY .481 DIA X .055 K

SKU: GRL60101


STUD-DRAW 3/8-24X3.91

HOLE SIZE A:0.769in. B:0.642in. A:19.5 B:16.3 MAXIMUM CAPACITY MILD STEEL 14GA 2.0mm OPERATION TYPE Hand/Hydr. MINIMUM PILOT HOLE .500in. 12.7mm ....(more info)


STUD-DRAW 3/8-24X3.91

SKU: GRL60113

Page 1 of 6 | Next >